Tascam DA-38 Preliminary Information page 3

DA-38
Rear Panel-DA-38
The DA-38 supports independent pre-roll parameters for both
LOCATE and PUNCH IN. Perhaps youÕre comfortable with a 5
second LOCATE pre-roll time, but want a longer pre-roll for the
PUNCH IN so that you can get better acclimated to the songÕs
tempo and feel. With the DA-38, you can easily accomplish this.
A SHUTTLE MONITOR function enables you to mute audio
while repositioning tape. This handy function is great during the
tracking process when you or other musicians are wearing head-
phones. The days of high-pitched program material screaming
through the phones every time you shuttle are over! Hey!
Speaking of shuttle Ñ keep in mind that only TASCAM MDMs
give you true shuttle capability. The precision rotary SHUTTLE
knob controls tape speed depending upon how far you turn the
control. In fact, only TASCAMÕs SHUTTLE control allows you to
advance or rewind the tape at your own pace; from 1/4 speed to
eight times the normal playback rate. You wonÕt find this feature
on others!
As Simple to Operate As An Analog Tape
Recorder
Perhaps the best thing about the DA-38 is the fact that you
already know how to use it. Unlike some other formats and
many hard disk systems, the DA-38Õs transport controls are just
as simple to use as any analog tape deck. The PLAY, RECORD,
FF, REW and STOP buttons are right where you expect them to
be Ñ and they work just as easily. Recording with the DA-38
is as simple as inserting a Hi-8mm tape, feeding signal to one
or more of the eight tracks, setting proper levels with the
12-segment LED peak reading displays and pressing PLAY
and RECORD.
Superior Format and Superior Transport
The DA-38 employs the latest tape and transport technology to
provide users with the best, most robust system on the market.
Hi-8mm tape is a metal particle format that provides higher
density recording which means better, more secure recordings.
This newer tape technology solves many shortcomings of the
S-VHS format where tape exposure, speed and tracking prob-
lems invariably sacrifice reliability and sound quality. In fact,
thatÕs why the Hi-8mm format is the preferred format among
post-production professionals worldwide.
The DA-38 uses a highly accurate and reliable, rapid response
transport mechanism that is unmatched by the competition.
Built to endure the constant Stop-Start-Stop-Start environment
of the recording studio, the transport features direct drive, brush-
less motors. Plus, the DA-38 uses TASCAMÕs exclusive write
after read, 4-head system of data reading/writing. This interleav-
ing design yields significantly more read area on tape. This
ensures better data integrity and provides superior dropout
protection.
The Most Advanced Tape-to-Head System
Only the Hi-8mm format, featured on TASCAM MDMs, provides
the safety and security of Auto Track Finding (ATF) technology.
This system embeds timing information into the tapeÕs subcode
area during the helical scan. ThereÕs no analog control track, like
youÕll find on other systems, that will fail due to tape stretching or
fraying. With ATF, you are assured of perfect tape interchange-
ability between any DA-38 or DA-88.
Precise Editing Ñ Seamless Punch In/Out
Because the DA-38Õs transport is so precise, you can define
tighter punch in/out points than previously available in the
analog domain. The DA-38Õs variable digital crossfade technolo-
gy (variable from 10ms ~ 90ms) promotes seamless punches
under a variety of conditions. If live ambient crowd noise is part
of your recording, a longer crossfade time of, say 90ms, will
preserve the recordingÕs character by making the transition from
existing to new program material longer and therefore, less
noticeable. Crowd noise wonÕt get choked off. Similarly, cymbal
crashes and other long duration sounds retain their natural
decay. For tight punches, a 10ms crossfade time will meet your
Multitrack DAT Recorder
page 3 of 5