Table of Contents
Advertisement
Operating the 2 / 3 Hour Start Up Timer Mode
The system has the ability to start the vehicle every 2 or 3 hours for a 48 hour
period. This feature is especially useful in cold climates where the only means to
keep the engine and engine fluids warm is to periodically start the engine. The
default setting is 3 hour, Selection between 2 or 3 hour is made in option
programming.
WARNING!
Be certain that the vehicle is outdoors before using this or any remote starting
device. A running engine produces dangerous carbon monoxide fumes which
can be harmful or fatal if prolonged exposure occurs. DO NOT remote start the
vehicle if it is garaged.
To begin the 2 / 3 hour start up timer mode:
1.
Turn the vehicle's ignition ON then OFF.
2.
Press and hold the valet button.
3.
Press the
4.
Release the valet button.
To exit the 2 / 3 hour start up timer mode:
1.
Turn the vehicle's Ignition ON.
OR
1.
Activate the remote vehicle start feature using the remote control.
Turbo Timer
This option will keep the engine running to allow the vehicle's turbo to properly cool
down before shutting the engine off.
To engage the Turbo Timer feature:
1.
With the vehicle running via the ignition key and your foot off of the
brake pedal.
2.
Engage the vehicle's parking brake and press the
buttons simultaneously.
3.
The vehicle's parking lights will turn on to verify the Turbo Timer
feature has been activated.
4.
Turn the ignition key OFF, the vehicle will continue to run until the pre-
programmed time has elapsed (1, 3, or 5 minutes)
To disengage the turbo timer feature, press the vehicle's brake pedal.
8
button 4 times, the system will;
a.
When set for 3 Hour (default) - chirp 2 times and flash the
parking lights 4 times.
b.
When set for 2 Hour - chirp 1 time and flash the parking
lights 2 times.
2010 Audiovox Electronics Corporation. All rights reserved.
and
Advertisement
Table of Contents
