Function Buttons - Honeywell CS071AE Owner's Manual

USE & OPERATION

Function Buttons

POWER
Press the POWER button to turn the unit on. The cooler will start
automatically at medium speed. After a few seconds the speed will
POWER
switch to low. To turn the unit off, press the button again.
SPEED
Press the 'SPEED' button repeatedly and the speed will change. The
indicator light will show the selected speed. High (Hi), Medium (Med)
SPEED
& Low (Lo).
COOL
To begin cooling the desired area, press the COOL button. The indicator
light will come on and the water pump will operate. You will feel the cooler
COOL
air after the honeycomb media is completely wet.
9