Yamaha YFM250 Owner's Manual page 44

ITEM
Rear brake
Clutch
5
Throttle lever
Control cables
Drive chain
Wheels and tires
Shift pedal
Brake pedal
Brake and clutch levers
Chassis fasteners
Instruments, lights and
switches
• Check operation. If soft or spongy, have Yamaha dealer bleed hy-
draulic system.
• Check brake pads for wear, and replace if necessary.
• Check brake fluid level in reservoir, and add specified brake fluid to
specified level if necessary.
• Check hydraulic system for leakage. Correct if necessary.
• Check operation, and correct if necessary.
• Lubricate cable if necessary.
• Check lever free play, and adjust if necessary.
• Make sure that operation is smooth. Lubricate cable and lever hous-
ing if necessary.
• Check lever free play, and adjust if necessary.
• Make sure that operation is smooth. Lubricate if necessary.
• Check chain slack, and adjust if necessary.
• Check chain condition. Lubricate if necessary.
• Check wheel condition, and replace if damaged.
• Check tire condition and tread depth. Replace if necessary.
• Check air pressure. Correct if necessary.
• Make sure that operation is smooth.
• Correct if necessary.
• Make sure that operation is smooth. Lubricate pedal pivoting point if
necessary.
• Make sure that operation is smooth. Lubricate lever pivoting points if
necessary.
• Make sure that all nuts, bolts and screws are properly tightened.
• Check operation, and correct if necessary.
ROUTINE
5-2
PAGE
5-3, 8-22, 8-23, 8-25
8-28
5-3, 8-21
8-31
5-4, 8-29, 8-31
5-4
8-33
8-33
8-32
5-6
5-6