Figure 44
Figure 45
External Antenna Deployments
All Cisco antenna connectors are labeled A, B, C, and so on. A has a higher priority than B, C, or D;
therefore, if the access point supports say three or four antennas and you only have two antennas, use
ports A and B until you could install the additional antennas.
Radiation Patterns for the AP 1600i @ 2.4 GHz
Radiation Patterns for the AP 1600i @ 5 GHz
Cisco Aironet 1600/2600/3600 Series Access Point Deployment Guide
External Antenna Deployments
35