Choosing A Channel; Choosing A Ctcss Code - Uniden PMR845-2CK Owner's Manual

UT009ZH_PMR845-2CK_E_1207
a. Press and hold the SEL/
b. Press the PTT button, MON, CALL or CH/SCAN key.
c. Wait 10 seconds until the unit automatically returns to
"Normal" mode.

Choosing a Channel

Your radio has 8 channels and 38
CTCSS codes you can use to talk to
others. In order to speak to someone,
each of you must set to the same
channel and CTCSS code.
To choose a channel:
With the radio in "Normal" operating
mode, press the CH/SCAN key and then
press the L or M key to increase or
decrease the channel number displayed.

Choosing a CTCSS Code

Allocating CTCSS codes to your handsets will help to reduce
interference but remember that handsets which have different
CTCSS codes set will not be able to communicate with each
other. Each of the channels 1-8 may have any one of the
codes, OFF or 1-38 selected. Code 00 (OFF) indicates no
CTCSS code selected and your radio can receive a signal
regardless of the code settings of the transmitting radio.
1) Enter the Menu. The CTCSS code on the LCD display will
blink.
Any problems call our helpline on 0845 2265664 (local call rate)
12/7/05 12:53 PM
key again.
Normal CTCSS VOX Level
OFF, 1-38 OFF, 1-3
7
Page 7
USING THE RADIO
Call Tone Key Lock Normal
1-5
ON-OFF