Asus DSL-N55U User Manual page 6

Power LED
1
Off: No power.
On: Device is ready.
Flashing slow: Rescue mode
Flashing quick: WPS is processing.
ADSL LED
2
Solid light: ADSL link is established.
Flashing: No ADSL link or unable to establish ADSL link.
WAN LED
3
Off: No power or no physical connection.
On: Has physical connection to a wide area network (WAN).
LAN LED
4
Off: No power or no physical connection.
On: Has physical connection to a local area network (LAN).
2.4GHz LED & 5GHz LEDs
5
Off: No 2.4GHz or 5GHz signal.
On: Wireless system is ready.
Flashing: Transmitting or receiving data via wireless connection.
ADSL port
6
Connect to a splitter or to a telephone outlet via an RJ-11 cable.
Power (DC-In) port
7
Insert the bundled AC adapter into this port and connect your router to a
power source.
Power switch
8
Press this button to turn the power on/off.
Wi-Fi switch
9
Switch to turn the WiFi feature on/off.
USB 2.0 / USB 1.1 ports
10
Insert USB 2.0/USB 1.1 devices such as USB hard disks or USB flash drives into
these ports.
Insert your iPad's USB cable into one of these ports to charge your iPad.
Insert your printer's USB cable into one of these ports to set up your network
printer. For details, refer to the section Setting up your network printer.
WPS button
11
This button launches the WPS Push Button Configuration process.
LAN 1 ~ 4 ports
12
Connect network cables into these ports to establish LAN connection.
Reset button
13
This button resets or restores the system to its factory default settings.
6