Onboard Tool Kit; Windshield Wiper Blades - BMW 2002 Z8 Owner's Manual

Onboard tool kit

130n
The onboard tool kit is located under
the luggage compartment's floor panel.

Windshield wiper blades

1. To move the wipers to the fold-out
position:
Turn the ignition on. Set the wiper
lever in position 1 – intermittent
mode. Turn the ignition back off
during the wiper-delay pause. The
wipers will then be roughly vertical
2. Swivel the wiper arm completely out
from the windshield
3. Position the wiper blade at an angle
and pull the release spring, refer to
arrow
4. Fold the wiper blade down and
unhook it toward the windshield
5. Pull the wiper blade past the wiper
arm toward the top
6. Insert a new wiper blade and press it
until you hear it click into place.
Fold the wipers back onto the
windshield before turning the igni-
tion key to position 1 or 2. If you do not,
the wipers could be damaged.<
Use only wiper blades approved
by BMW.<
Online Edition for Part No. 01 41 0 156 878 - © 06/02 BMW AG