Sony KLV-52W300A Operating Instructions Manual page 35

Photo Colour Space
Colour Matrix
RGB Dynamic Range
Colour System
Selects the option to match the output colour space within the output signal from the
equipment connected to the HDMI or component input jacks. Select "sYCC" when
using the equipment that supports "x.v.Colour".
~
The setting is fixed to "sRGB" when the input signal is HDMI (RGB), even if "sYCC" is
selected.
Usually used in the factory setting (Video1, 2, 3 (Composite and S video input
signal) is set to "ITU601", and HD/DVD 1, 2 (Component input signal) is set to
"Auto"). If the colour tone of the picture from the input source does not match the
colour standard and looks unnatural, select either "ITU601" or "ITU709", which
normalizes the colour tone.
Produces natural colour by changing the luminance tone reproduciton of HDMI
input colour signals (RGB). Set to "Auto" for standard use. Change the settings only
when the luminance tone of the display is unnatural.
Selects the colour system ("Auto", "PAL", "SECAM", "NTSC3.58" or
"NTSC4.43") according to the input signal from the input source.
35
GB