Download Print this page

Huffy 2002 Owner's Manual

Huffy sports composite framed acrylic backboard owners manual

Advertisement

Quick Links

A Huffy Company
Composite Framed Acrylic Backboard
SAFETY INSTRUCTIONS
FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS MAY
RESULT IN SERIOUS INJURY,
PROPERTY DAMAGE AND WILL VOID WARRANTY.
Owner must ensure that all players know and follow these
rules for safe operation of the unit.
To ensure safety, do not attempt to assemble this system without fol-
lowing the instructions carefully. Before beginning assembly, read the
instructions and identify parts using the hardware identifier and parts
list in this document. Proper and complete assembly, use and supervi-
sion is essential for proper operation and to reduce the risk of accident
or injury. A high probability of serious injury exists if this system is not
installed, maintained, and operated properly.
• Read and understand the warning label enclosed with hardware. It is
the responsibility of the customer to mount this label. It should be
affixed to the pole, wall, or door near playing area, at a height between 4-
6 feet above ground level and in a location visible to all players.
• During assembly, if using a ladder use extreme caution. Two people are
recommended for this operation.
• If technical assistance is required, contact Huffy Sports.
• Serious injury could occur if teeth/face come in contact with backboard,
net or rim.
• Minimum operational height is 6' 6" to the bottom of backboard.
Most injuries are caused by misuse and/or not following instructions.
Use caution when using this unit.
In U.S. and Canada only: IMPORTANT!
We appreciate your purchasing one of our many fine products. We are sure that you will be very satisfied with your selection. We regret
that although great care and effort have been taken, occasionally problems may occur. To ensure prompt and correct handling of any
problems, or to answer any questions, please contact our Toll-Free Customer Service Number listed below. Service will be quicker if
you have your Model Number (found on carton) and assembly instructions ready when calling. PLEASE WRITE YOUR MODEL
NUMBER IN THE SPACE PROVIDED ABOVE.
Toll-Free Customer Service Number for U.S: 1-800-558-5234 and Canada Only: 1-800-284-8339
© COPYRIGHT 2002 by HUFFY SPORTS
___________________
MODEL:
Internet Address: http://www.huffysports.com
• Step Ladder 8 ft. (2.4m)
• Adjustable Wrench
• Wrenches: (One) 3/4" (Two) 1/2"
• Phillips Screwdriver
FAILURE TO FOLLOW THESE WARNINGS MAY RESULT
IN SERIOUS INJURY AND/OR PROPERTY DAMAGE.
·
See instruction manual for proper installation and
maintenance.
·
Use caution when performing dunk type activities on this unit.
·
Do not hang from any part of unit, including backboard,
support braces, rim or net.
·
Check unit before each use for loose hardware, excessive
wear and signs of corrosion and repair before using.
·
During play, use extreme caution to keep player's face away
from the backboard, rim or net. Serious injury could occur if
teeth/face come in contact with backboard, rim or net.
·
During play, do not wear jewelry (rings, watches, necklaces,
etc.) Objects may entangle in net.
In the U.S.: 1-800-558-5234 and Canada Only: 1-800-284-8339
Don't go back to the store!
1
Customer Service Center
N53 W24700 South Corporate Circle
Sussex, WI 53089
U.S.A.
REQUIRED TOOLS AND
MATERIALS:
WARNING
Owner must ensure that all players know and
follow these rules for safe operation of the unit.
In Australia: 1-800-632-792
08/02
206118 5/97
P/N 211981

Advertisement

loading

Summary of Contents for Huffy 2002

  • Page 1 • During assembly, if using a ladder use extreme caution. Two people are recommended for this operation. • If technical assistance is required, contact Huffy Sports. • Serious injury could occur if teeth/face come in contact with backboard, net or rim.
  • Page 2: Hardware Identifier

    Item Qty. Part No. Description 206118 Warning Label 201611 Hex Flange Bolt 5/16-18 x 3 Long 203104 Hex Flange Bolt 5/16-18 x 2 Long 203309 Washer, 1 O.D. 203100 Hex Flange Nut, 5/16 x 18 201219 Clips, Net Holder Smart Clips 204281 200533 Spacer, Board Mount...
  • Page 3 Install spacers (9) and attach backboard. IMPORTANT! For spring loaded rim assembly, refer to instructions included with rim hardware. IMPORTANT! For spring loaded rim assembly, refer to instructions included with rim hardware. P/N 211981 P/N 211981 08/02 08/02 Model 8406 Universal Mounting Bracket 08/02 08/02...
  • Page 4 IMPORTANT! For spring loaded rim assembly, refer to instructions included with rim hardware. WARNING: IF YOUR SYSTEM IS EQUIPPED WITH AN ACRYLIC BACKBOARD, EXAMINE BACKBOARD FOR ANY DAMAGE THAT MAY HAVE OCCURRED DURING SHIPMENT. CRACKS IN THE BACKBOARD COULD RESULT IN SUDDEN BREAKAGE.
  • Page 5 WARNING: Install net clips. clips, or when all net clips are not present could result in bodily harm. Be sure to follow directions carefully. Insert one “arm” of clip into ram as shown. Twist “body” of clip slightly so that second Push in direction indicated by arrows.
  • Page 6: Side View

    Twist net until it snaps into position. Net must be centered through clip. NET INSTALLATION Insert net into bottom of clip as shown. SIDE VIEW NETCLIP SIDE VIEW NETCLIP 08/02 08/02 08/02 08/02 P/N 211981 P/N 211981 P/N 211981 P/N 211981...

This manual is also suitable for:

8406