Dymo MimioClassroom User Manual page 144

Customizing MimioStudio
n
These settings are only used when your MimioTeach or Mimio Interactive device is used to
capture digital ink.
To adjust the settings for a MimioTeach or Mimio Interactive device
1. Choose the device to adjust from the Device list.
2. Make the changes you want to the settings.
3. Click Apply.
To adjust surface size for a MimioTeach or Mimio Interactive device
To adjust the mounting location for a Mimio Interactive bar
134
Create a combined surface using two or more MimioTeach devices and two or more
MimioCapture devices
You can combine up to four different surfaces.
Do one of the following:
Choose a size from the Surface Size list.
l
Choose Custom from the Surface Size list and enter the desired values into the
l
Width and Height boxes.
Click Auto Size and touch a MimioCapture or Mimio Capture Kit pen at the
l
location shown in the Auto Size dialog box.
Choose a mounting location from the Device Mounting list.
The sensors on the Mimio Interactive bar must point in toward the writing surface.