Preparation before operation
How to Insert the Batteries
Remove the battery cover by pulling it according to the
arrow direction.
Insert new batteries making sure that the (+) and (-) of
battery are installed correctly.
Reattach the cover by sliding it back into position.
NOTES:
• Use 2 AAA(1.5volt) batteries. Do not use rechargeable
batteries.
Storage and Tips For Using the Remote Control
• The remote control may be stored mounted on a
wall.
Signal Receptor
Receives the signals from the remote control.(Signal receiving sound: two short beeps or one long beep.)
Operation Indication Lamps
On/Off
Timer or Sleep Mode : Lights up during Timer operation or Sleep mode.
Defrost Mode
Outdoor unit
operation
Plasma Mode
Auto Restart Mode
Auto Restart Button
Forced Operation Button : Operation starts, when this button is pressed
: Lights up during the system operation.
: Lights up during Defrost Mode or Hot
Start operation (Heat pump model only)
: Lights up during outdoor unit operation.
(Cooling model only)
: Lights up during plasma-purification operation.
(option)
: Lights up during if Restart Button is pressed.
: In failure of electric power, if the button is
pressed the unit runs as previous setting
operation when power returns.
and stops when you press the button again.
4
• To operate the room air conditioner, aim the
remote control at the signal receptor.
Signal
receptor
Operation indication lamps