Cleaning; Caster Wheels; Hardware - Husqvarna Z4219 Operator's Manual

Cleaning

Regular cleaning and washing, especially under the
mower deck, will increase the machine's life-span.
Make it a habit to clean the machine directly after use
(after it is cooled), before the dirt sticks.
Do not spray water on the top of the mower deck. Use
compressed air to clean the top side of mower deck.
Regularly clean deck and underside of the deck with
normal water pressure. Do not use a high pressure
washer or steam cleaner. Avoid spraying engine and
electrical components with water.
Do not rinse hot surfaces with cold water. Let unit cool
before washing.
Use protective glasses when
cleaning and washing.

Caster Wheels

Check every 200 hours. Check that wheels rotate
freely. If not, take the unit to your dealer for service.
Foam filled tires or solid tires will void the warranty.
Removal and Reinstallation
Remove nut and caster bolt.
Pull the wheel out of the fork and take care of the
sleeve.
Install in reverse order. Tighten caster bolt.
IMPORTANT INFORMATION
DO NOT add any type of tire liner or foam
fill material to the tires. Excessive loads
created by foam filled tires will cause
premature failures.
Only use O.E.M. specified tires.

Hardware

Check daily. Inspect the entire machine for loose or
missing hardware.
MAINTENANCE
Cleaning
1
1. Caster bolt
Caster wheel
8050-092
8011-619
-49
English