Syncing The Bluetooth ® To Your Ipad 2 Tablet - Brookstone Bluetooth Owner's Manual

syncing The blueTooTh
1 . Power on your iPad 2 Tablet .
2 . Slide the On/Off switch on the Bluetooth
Both the Bluetooth
for a few seconds and then shut off .
3 . Press the Connect button on the Bluetooth
will illuminate and the Bluetooth
4 . Select the "Settings" icon on your iPad 2 Tablet's screen .
5 . Locate and select "Bluetooth" in your iPad 2 Tablet's "General" menu .
6 . Under "Devices" on your iPad 2 Tablet, select the Bluetooth
7 . The iPad 2 Tablet will now prompt you to enter your computer Bluetooth
and press either the Return or Enter key using the Bluetooth
8 . The iPad 2 Tablet screen should now show the Bluetooth
connected successfully .
9 . The Power LED will remain illuminated while the keyboard is powered on .
10 . Slide the On/Off switch to "off" when you are done using the keyboard .
11 . If your iPad 2 Tablet goes into standby mode, the Bluetooth
should still be synced . If you power-off your iPad 2 Tablet you may need to
re-sync . If you use the Bluetooth
or it doesn't connect properly, follow the steps above to re-sync .
Note: The Bluetooth
after 15 minutes of non-use in order to preserve battery life. Just press any key
to reactivate the keyboard.
LED and the power LED illuminators will light up
®
LED will flash .
®
Keyboard Case with a new iPad 2 Tablet,
®
Keyboard Case will automatically go into standby mode
®
To your ipad 2 Tablet
®
Keyboard Case to "on" .
®
Keyboard Case . The Power LED
®
®
Keyboard Case .
®
password
®
Keyboard Case .
®
Keyboard Case has
Keyboard Case
®
6