Scanning
f
To scan using the NFC function, follow these steps:
NOTE
To change the scan options, see Scan Settings on page 40. After changing the scan options, press the
Back button to exit the Scan Settings screen.
1 When the main scan screen is displayed, hold your mobile device against the NFC logo on your
Brother machine.
When the mobile device is connected to the Brother machine, you will hear a sound and Touch to
beam will be displayed on the mobile device's screen.
2 Hold your mobile device against the NFC logo, and tap the center of the screen on your mobile device.
The machine will start to scan the document.
NOTE
If your mobile device is not recognized, reposition your mobile device over the NFC logo and try again.
3
36