5 RocketRAID 600L BIOS Utility
The RocketRAID 600L controller will display its BIOS screen during the system's boot process. The BIOS
Utility will display information about hard drives attached to the adapter. Make sure all attached drives
are detected by this utility. If any of the hard drive is not detected, power down the system and check the
power and cable connections.
Press "Ctrl+H" key combination to access the RocketRAID 600L adapter's BIOS Utility.
5.1 BIOS Settings Overview
The RocketRAID 600L controller BIOS utility is an interface that provides management commands and
controller related settings.
Note: The following screenshots depict the RocketRAID 642L BIOS utility. However, all RocketRAID 600L
models utilize the same interface.
5.2 Using the BIOS Utility
The following keys are utilized by the RocketRAID 600L BIOS utility:
Arrow keys – Use these to move between different menu items.
Enter – Open the selected toolbar command/execute the selected command.
Esc – Move back to the previous menu, cancel the selected operation, or exit the BIOS Utility.
11