Getting Started; Install Batteries; Connect Earphones - Napa DAV314G User Manual

Getting Started

Using player
1
Unpack
Make sure your player includes the following accessories:
• DAV314G Player
• Earphone
2

Install batteries

1 Press and pull out the battery door.
2 Place two AA size alkaline batteries in. Ensure battery polarity (+ /-) is correct.
NOTE: .............................................................. The required adaptor should be 600mA, 4.5 volt DC output .
If you purchase one AC adaptor to connect the player, please ensure it is compatible with the jack on the
back of the player. It is strongly recommended that NOT connect one AC adaptor in the jack while the
player is using no-rechargeable type batteries.
3

Connect Earphones

Connect the supplied earphones to the Earphone port on the side of the player. If you are using one compatible remote
control, plug the earphones into the remote control and then plug the remote control into the Earphone port.
• Quick Start Guide
• Strap
DAV314G PORTABLE CD-MP3 PLAYER
• Manual CD
• Warranty Card
Using player
5
Getting started