Figure 5-14. Installing the Additional Air Shroud
An additional air shroud is required for high-powered CPUs, to provide extra cooling.
Install the additional air shroud if necessary.
Installing the Additional Air Shroud
Installing the Additional Air Shroud in the Chassis
1. Power down the system as described in Section 5-2 and open the chassis
cover.
2. Remove the left side break-away piece of the main air shroud.
3. Slide the additional air shroud into the chassis before installing the main air
shroud.
4. Install the main air shroud as directed on the previous page.
Chapter 5: Chassis Setup and Maintenance
1
3
5-15
1
4