System Requirements; Features - D-Link DSL-2730U User Manual

2.2 System Requirements

Recommended system requirements are as follows:

An 10 baseT/100BaseT Ethernet card is installed on your PC

A hub or switch (attached to several PCs through one of Ethernet interfaces on the device)

Operating system: Windows 98SE, Windows 2000, Windows ME, Windows XP, Windows Vista or Windows 7

Internet Explorer V5.0 or higher, Netscape V4.0 or higher, or Firefox 1.5 or higher

2.3 Features

The device supports the following features:
 User-friendly GUI for web configuration
 Several pre-configured popular games. Just enable the game and the port settings are automatically configured.
 Compatible with all standard Internet applications
 Industry standard and interoperable DSL interface
 Simple web-based status page displays a snapshot of system configuration, and links to the configuration pages
 Downloadable flash software updates
 Support for up to 8 permanent virtual circuits (PVC)
 Support for up to 8 PPPoE sessions
 Support RIP v1 & RIP v2
 WLAN with high-speed data transfer rates of up to 130 Mbps, compatible with IEEE 802.11b/g/n, 2.4GHz compliant equipment
 Optimized Linux 2.6 Operating System
 IP routing and bridging
 Asynchronous transfer mode (ATM) and digital subscriber line (DSL) support
 Point-to-point protocol (PPP)
 Network/port address translation (NAT/PAT)
 Quality of service (QoS)
 Wireless LAN security: WPA, 802.1x, RADIUS client
 Universal plug-and-play(UPnP)
 File server for network attached storage (NAS) devices
 Print server
 Web filtering
 Management and control
Web-based management (WBM)
-
Command line interface (CLI)
-
TR-069 WAN management protocol
-
 Remote update
 System statistics and monitoring
DSL-2730U User Manual
4