Table of Contents
Advertisement
Set Setup command
Description Manages configuration settings for Remote Authentication Dial-In User Service (RADIUS) servers,
switch services, SNMP, and system configurations.
Authority Admin session
Syntax
set setup
radius
services
snmp
system
Operands
radius
Prompts you in a line-by-line fashion to configure RADIUS servers for user account and device
authentication.
Table 49
Entry
DeviceAuthOrder
UserAuthOrder
TotalServers
ServerIPAddress
ServerUDPPort
DeviceAuthServer
170 Command Line Interface
Table 49
describes the RADIUS server configuration fields.
RADIUS service settings
Description
IMPORTANT:
PFE key
Authenticator priority for devices:
•
Local — authenticate devices using only the local security database.
This is the default.
•
Radius — authenticate devices using only the security database on
the RADIUS server.
•
RadiusLocal — authenticate devices using the RADIUS server security
database first. If the RADIUS server is unavailable, then use the local
switch security database.
Authenticator priority for user accounts:
•
Local — authenticate users using only the local security database.
This is the default.
•
Radius — authenticate users using only the security database on the
RADIUS server.
•
RadiusLocal — authenticate users using the RADIUS server security
database first. If the RADIUS server is unavailable, then use the local
switch security database.
Number of RADIUS servers to configure during this session. Setting
TotalServers to 0 disables all RADIUS authentication. The default is 0.
IP address of the RADIUS server. The default is 10.0.0.1.
User Datagram Protocol (UDP) port number on the RADIUS server. The
default is 1812.
IMPORTANT:
PFE key
Enable (True) or disable (False) this server for device authentication. The
default is False.
This setting is valid only with the SANtegrity Enhanced
This setting is valid only with the SANtegrity Enhanced
Advertisement
Table of Contents
