Kenmore 405.74159310 Use And Care Manual page 16

17.
Muti-Stage Cooking
At most 2 stages can be set for cooking. If one stage is Defrost, it will automatically set to
be the first stage.
Note: Auto Menu and Preheat cannot be set in Multi-stage Cooking.
Example: 80% Power Level for 5 minutes followed by 60% Power Level for 10 minutes;
saved as memory 3.
a. Press Favorite 3 times; screen displays 3.
b. Press Micro, then press "5", "0" and "0" to set first stage cook time.
c. Press Power Level once, then press "8" to choose 80% first stage cooking power.
d. Press Micro again, then press "1 ", "0", "0" and "0" to set second stage cook time.
e. Press Power Level again, then press "6" to choose 60% second stage cooking power.
f. Press _ to immediately start multi-stage cooking.
g. To choose the proce e from the memory list, press Favorite three times. Screen will
display "3"; press to run procedure.
Note: If you do not want to save a particular multi-stage program as a procedure, do not
press Favorite as the first step. Press after programming both stages.
18.
inquiring Function
(1) When oven is cooking, press Timer/Clock for the time of day to appear for three seconds
in the display.
(2) When oven is cooking, press Conv., Power Level or Combi pads for cooking power to
appear for three seconds in the display.
lg. LockFunction
To lock the microwave so that it cannot be operated by children or other unintended users, press
pad for 3 seconds. You will hear a long beep. "LOC" will display.
To unlock, press for 3 seconds, you will hear a long beep and "LOC" will disappear.
If the clock has been set, the oven will return to display the clock. Otherwise, "0:00" will display.
20. Cooking End Reminder Function
The oven will beep five times to alert the user that cooking time has ended. "End" will display.
The time of day will display by opening the door or pressing pad.
21.
Other Specifications
(1) must be pressed to continue cooking if the door is opened during cooking.
(2) A single beep sounds to indicate that a pad is correctly pressed; if pad is not correctly
pressed, no beep sounds.
EN-15