Lenovo IdeaPad U330p Hardware Maintenance Manual page 45

Lenovo IdeaPad U330p/U330 Touch/U430p/U430 Touch
Figure 3. Removal steps of hard disk drive (continued)
U430p/U430 Touch: Hold the SATA receptacle connector with one hand and
pull the hard disk drive (secured in the metal frame) in the direction shown
below to detach the connector.
c
Remove four screws
Step Screw (quantity)
c
M3.0 × 3.5 mm, flat-head, nylok-coated
(4)
When installing: Make sure that the HDD connector is attached firmly.
and detach the metal frame from the hard disk drive.
c
c
Color Torque
Silver 3.0±0.2 kgfcm
41