Discover The Ip Address For The Axis 206W; Set Up The Axis 206W On Other Operating Systems - Axis 206 Family User Manual

AXIS 206 - Install the AXIS 206W
16

Discover the IP address for the AXIS 206W

If you set the IP address manually, you can now access the camera's web interface simply
by starting a browser and entering the IP address.
If you selected Obtain IP address via DHCP, you have several options:
• Reconnect the USB cable, browse to the camera as before, and restart the AXIS Setup
Tool. The DHCP-assigned address will be displayed in the tool.
• If you are using e.g. a home broadband router, you may find it convenient to view the
router's administration pages to discover which IP address has been assigned to your AXIS
206W. Please consult the router's documentation for further information.
• If your network has an Internet connection (with no HTTP proxy), use the AXIS Dynamic
DNS Service to assign your camera a DNS name, which is then used to access the camera.
See page 11 for more information.
• If your network uses automatic IP addressing (DHCP) and your computer uses the UPnP
service, the AXIS 206W will automatically be detected and displayed on your screen.
• Use AXIS IP Utility 2.0 to discover the IP address. See the CD included with the product.

Set up the AXIS 206W on other operating systems

To set up the AXIS 206W on other operating systems (Linux/Unix/Mac), follow these steps:
1. Connect the camera to the computer via the USB cable. This allows you to access the
camera as a USB Mass Storage device.
2. Browse to and open the file config.txt and enter the encryption keys, the SSID network
name, the IP address, etc. The wireless settings entered here should be identical to
those previously configured in your wireless access point.
3. Save the file, wait at least 10 seconds for the settings to take effect and then restart the
camera to enable the wireless connection.
UPnP is a certification mark of the UPnP
TM
Implementers Corporation.
TM
TM