BMW 318i Owner's Manual page 69

Outside temperature display and digital clock*
68
You can
d
display the time and date
d
pre-program an hourly reminder sig-
nal (memo) e.g., a reminder of the
news
d
display the outside temperature.
1
°C/°F
A-TEMP HR/DAT MEMO SET
10 9 8 7 6
1 Display for outside temperature
gauge
2 Display for time and date
3 Tone symbol for active memo
function
4 Entry key for minutes/date
5 Entry key for hours/date
6 SET key for starting
7 Function key - memo
8 Function key - time/date
9 Scale selection key
10 Function key - outside temperature
To display time and date
2 3
d
When the ignition key is in position 0 or
removed, the displays appear for a few
seconds; in ignition key position 1 the
desired value is displayed indefinitely.
h/DAT min/DAT
You can display the time in 12 or 24 hour
increments; the date can be shown in
European or US sequence. To change
5 4
setting:
d
d
In the 12-hour mode, AM or PM will
appear on the right side of the clock
display.
Press the function key (8).
Press the HR/DAT key for approx.
3 seconds until the dots in the
display flash.
Press the scale selection key.
Online Edition for Part No. 01 41 9 790 377 - © 07/98 BMW AG