Table of Contents
Advertisement
∫ Manual tuning and presetting
Select a radio broadcast.
1
Press [PLAY MENU] repeatedly to select
"TUNEMODE".
2
Press [3, 4] to select "MANUAL" and then press
[OK].
3
Press [:/6] or [5/9] to tune to the
required station.
≥ To start automatic tuning, press and hold [:/6],
[5/9] until the frequency starts scrolling. Tuning
stops when a station is found.
To preset the channel
4
While listening to the radio broadcast
Press [OK].
5
Press [3, 4] to select the channel and then press
[OK].
∫ To improve FM sound quality
1
While receiving FM broadcasts, press
[PLAY MENU] repeatedly to select "FM MODE".
2
Press [3, 4] to select "MONO" and then press
[OK].
≥ This setting can be preset and memorised. To do so,
continue to step 4 of "Manual tuning and presetting".
≥ Select "STEREO" in step 2 to return to stereo broadcasts.
≥ "MONO" is cancelled if the frequency is changed.
≥ If "MONO" is selected, regardless of the type of signal this
unit is receiving, "FM MONO" is displayed. (l below)
∫ To display the current FM signal status
While receiving FM broadcast, press [DISPLAY].
"FM ST":
The FM signal is in stereo.
"FM":
The FM signal is in monaural.
≥ "FM" is also displayed even if this unit is not tuned to a
station.
≥ "STEREO" is displayed when this unit tunes to a stereo
broadcast.
17
RQT9756
Hide quick links:
Advertisement
Table of Contents
