Disassembly Instructions - Roadstar DT-956LCD Service Manual

1. Using the unlock key that came with the unit or a similar tool, unlock the Mounting Box and remove toward the
rear of the unit.
2. Take out the Cabinet Bottom.
3. Remove six screws (A) from on the power board then remove the Power Board; The Left Support; The Right
Support and the Main Board.
4. Take out the Ring and remove two screws (B) from each side of the base then remove the Base.
5. Remove two screws (C) from on the front support and remove two screws (D) from the rear support.
6. Remove three screws (E) and remove the Front Support.
Remove two screws (F) and remove the Deck and the Rear Support.
7. Remove eight screws (G) from each side of the cabinet top then remove the Rock; The Display and the
Cabinet Top.
DISASSEMBLY INSTRUCTIONS (UNIT)
3