(2) Disconnect the battery cooling blower
assembly connector and clamp.
(3) Remove the 2 bolts, nut and battery
cooling blower assembly.
22. Remove the 2 bolts and child restraint seat
anchor bracket sub-assembly LH.
23. Remove the 2 bolts and child restraint seat
anchor bracket sub-assembly RH.
24. Disconnect the 2 frame wires.
Caution:
Wear insulated gloves.
Notice:
Insulate the terminals of the removed
frame wire with insulating tape.
(1)
Remove the 2 nuts, then disconnect the
frame wire from the hybrid battery
junction block assembly.
(2)
Disconnect the clamp and frame wire.
26