System-Time Dst Predefined; System-Time Dst Date - TP-Link JetStream TL-SL5428E Cli Reference Manual

system-time dst predefined

Description
The system-time dst predefined command is used to select a predefined DST
configuration and the configuration can be recycled.
Syntax
system-time dst predefined [ USA | Australia | European | New-Zealand ]
Parameter
USA | Australia | European | New-Zealand —— Predefined DST mode, with
four options: USA, Australia, European and New-Zealand. By default, the
setting is "European".
The DST time periods which the four predefined DST mode represents are
displayed as follow:
USA: First Sunday in April, 02:00 ~ Last Sunday in October, 02:00.
Australia: First Sunday in October, 02:00 ~ First Sunday in April, 03:00.
European: Last Sunday in March, 01:00 ~ Last Sunday in October, 01:00.
New Zealand: First Sunday in October, 02:00 ~ Last Sunday in March, 03:00.
Command Mode
Global Configuration Mode
Example
Configure the DST period of the switch as European:
TL-SL5428E(config)#system-time dst predefined European

system-time dst date

Description
The system-time dst date command is used to specify the DST configuration
in Date mode. This configuration is one-off in use. By default, the current year is
used as the starting time. DST time periods should be within 12 months over
one/two year.
Syntax
system-time dst date {smonth} {sday} {stime} {emonth} {eday} {etime} [offset]
TL-SL5428E JetStream L2 Managed Switch CLI Guide
118