Softkeys - NEC DT750 User Manual

Univerge sv8100 terminal
Hide thumbs Also See for DT750:
Table of Contents

Advertisement

1.

Softkeys

The softkeys on DT750 provide a set of functions
on the LCD that adapts to the changing state of the
telephone. While default softkey settings are
provided, desired functions can be assigned to
individual stations as required. The softkeys, at
the bottom of the LCD, can display the names of
available functions, names of user-assigned
functions and names of functions assigned by a
specific softkey pattern. Displayed softkeys can
vary, depending on the state of the phone and/or
when the Next/Previous button is pressed.
For example, when an incoming call is terminated
to a line key on Page 3 while Page 1 is being
displayed on the screen, the screen is not
automatically switched from Page 1 to Page 3.
The user must display Page 3 manually and then
answer the incoming call.
2-12 THU 8:19AM
2200
List
Exit
J. Jones
Dir
VMsg
Help
Exit Key
Press to exit from the Menu or Help mode and go
back to the time display.
Help Key
Press the Help Key, then desired softkey for
helpful information about that key.
MIC (Microphone)
Press the softkey below "MIC" to activate or
deactivate the Microphone. LED on Mic key will
illuminate when Mic is on.
DND (Do Not Disturb)
Press the softkey to reject call termination to the
preassigned station.
Default Displays for Each Status
Default softkey settings are provided
corresponding to particular functions. Different
softkey settings are displayed at the bottom of the
LCD depending on the status, as shown below.
Different patterns of softkey settings can be
registered for individual call status and assigned to
individual terminals as required.
11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Univerge sv8100 terminal dt750

Table of Contents