Intel RAID High Availability Storage User Manual page 15

®
Figure 7 Two-Server Intel RAID High Availability Storage Configuration
Follow these steps to set up the hardware for a dual-server-JBOD configuration for Intel® RAID High
Availability Storage clustering.
®
1. Install an Intel RAID High Availability Storage controller board in each of the two server modules,
following the instructions in the Quick Installation Guide.
2. If necessary, install network boards in the two server modules and install the cabling between them.
3. Install the two server modules and the JBOD enclosure in an industry-standard cabinet, following the
instructions in the manufacturer documentation.
4. Connect the host SFF-8088 connectors on the JBOD enclosure, or enclosures, to the SFF-8088
connectors on the front of the two server modules.
See Section Cabling Configurations, for specific cabling instructions for one or two JBODs.
®
Intel High Availability Storage User Guide 15