Attaching the stand for the 32" model
To complete the stand installation you will need a Phillips screw driver.
Place the TV set on a fl at and clean surface with the panel facing downwards to avoid damage.
1 1
(fi g.1) Attach the stand neck to the rear of
the TV set.
11
/2
3 3
(fi g.3) Attach the stand base to the neck.
8
4 x
ST (4x14)
2 2
(fi g.2) Secure the neck to the TV using the
4 x ST(4x14) screws provided.
4 4
(fi g.4) Secure the base to the neck using the
4 x ST(4x16) screws provided.
4 x ST (4x16)