Advertisement
Quick Links
QUICK START GUIDE - CASCADE™ PELLET STOVE
1
PURCHASING THE CORRECT FUEL FOR THE STOVE
The Cascade™ pellet stove has been designed to burn wood pellets only. We recommend
burning Premium Grade wood pellet fuel manufactured by companies who are members of
the Pellet Fuels Institute (PFI). Although similar in appearance to those made of wood, other
pelletized fuels such as wheat, barley, or corn will adversely affect the performance of the
stove and may compromise safety.
RECOMMENDED FUEL
•
PFI APPROVED
•
PREMIUM GRADE
•
LESS THAN 1% ASH CONTENT
•
LESS THAN 300 PPM CHLORIDES
WARNING
Before you set up or operate your stove, review all safety, installation,
and operation instructions in your "Installation and Operation Manual."
USING THIS GUIDE
This guide contains 5 easy steps to help you learn more about using
your new Cascade pellet stove. Detailed operating and cleaning in-
structions are located in the "Installation and Operation Manual."
INCORRECT FUEL
•
MOISTURE DAMAGE
•
EXCESSIVE SAWDUST
•
HIGH CHLORIDE OR
ASH CONTENT
•
OVERSIZED PELLETS
(LONGER THAN 1-1/2")
•
COMMERCIAL GRADE
•
ECONOMY GRADE
PFI LOGO
•
WHEAT PELLETS
•
BARLEY PELLETS
•
BARK PELLETS
•
CORN
Advertisement
Related Manuals for Lennox Hearth Products CASCADE
Summary of Contents for Lennox Hearth Products CASCADE
- Page 1 “Installation and Operation Manual.” PURCHASING THE CORRECT FUEL FOR THE STOVE The Cascade™ pellet stove has been designed to burn wood pellets only. We recommend burning Premium Grade wood pellet fuel manufactured by companies who are members of the Pellet Fuels Institute (PFI).
- Page 2 4. To turn off stove, slide the switch to the “OFF” STOPPING THE CASCADE PELLET STOVE RE-FUELING WHILE IN OPERATION position. Open hopper lid and fill hopper with pellets Slide the switch to the “OFF” position and allow any...
- Page 3 DAMPER ADJUSTMENT The Cascade™ pellet stove is equipped with a damper which is used to fine tune combustion in order to achieve a steady, consistent, clean burn. Periodic adjustment to the damper may be necessary at times to compensate for variables such as fuel, venting, altitude, and maintenance intervals.
- Page 4 CLEANING AND MAINTENANCE SCHEDULE In addition to the regular maintenance procedures described below, the “Installation and Operation Manual” out- lines yearly service that should be performed by a qualified technician. UltraGrate™ Heat Exchanger The UltraGrate should be checked Keeping the heat exchanger for “clinkers”...