Advertisement
BeeLINK source option.
The BeeLINK active option sets which source button on the remote control, that makes
the BeeLINK2 go active and turns on the TV, as described in the previous chapter.
The BeeLINK source option combines other source buttons on the remote control, with
the input sockets on the TV. The source option can force the TV to open a specific input,
when another source is selected.
Pioneer TVs have up to 9 selectable sources, as shown in this table:
0: No new source
1: HDMI 1
2: HDMI 2
3: HDMI 3
Source buttons on beo4, like s, T, f,c,y can be programmed to
select one of these inputs. Here are some programming examples:
An option programming sequence is started by pressing the little red switch on the
BeeLINK2 controller, until its LED starts flashing. Then the 3 code option must be
entered with the B&O remote control. Here some examples:
Beo4 Source Volume
T1 0
T2 0
T1 1
d2 0
d9 0
c 1 0
4: HDMI 4
5: Video 1
6: Video 2
Function
T
selects HDMI 1 on the TV.
T
selects HDMI 2 on the TV.
T
selects HDMI 1 on the TV.
d
selects HDMI 2 on the TV.
d
selects Component on the TV.
c
selects HDMI 1 on the TV.
7: Video 3
8: Component 1
9: Component 2
No volume regulation on TV
No volume regulation on TV
Volume regulation on TV
No volume regulation on TV
No volume regulation on TV
No volume regulation on TV
Advertisement
