Chapter 3: Features
Chapter 3: Features
Clear All
Remote
Functions
36
Clearing All Remote Functions
This feature completely resets the remote to its factory default settings, and is convenient if you want
a fresh start instead of deleting your settings. It clears all customer-programmed codes, Learned
commands, macros, and events, and resets all key labels.
1. Press and hold the SETUP/SHIFT key until Entering Setup Mode appears.
OK
2. Press and release SETUP/SHIFT until Go to More Options appears, then press the OK key.
System Info Options? appears.
EXIT
Tip: You can also use the CH+/– keys to scroll forward or backward through the Setup menus.
3. Press and release SETUP/SHIFT until Clear All Remote Functions appears, then press OK.
4. Clear All Functions? Pls Confi rm appears. Press OK to confi rm. All settings reset to the factory
defaults.
To cancel at any time, press EXIT. No Functions Cleared appears.
Chapter 3