Cleaning The Ventilation Grids - SMA SUNNY BOY 6000TL?US User Manual

SMA America, LLC
6.5 Cleaning the Ventilation Grids
The ventilation grids must be clean for optimum heat dissipation of the device. Clean the ventilation
grids regularly according to the following procedure.
1. Remove the ventilation grids sideways.
2.
Damage to the inverter caused by foreign bodies.
• Do not remove the ventilation grids permanently. This prevents foreign bodies from
entering the enclosure.
3. Clean the ventilation grids with a soft brush, a paintbrush or compressed air.
4. Close the recessed grips with the ventilation grids.
Ensure that the assignment is correct. The correct
enclosure side is marked on the interior of each
ventilation grid: left side "links ⁄ left" and right side
"rechts ⁄ right".
User Manual SB6-11TLUS-BA-eng-BUS121211
6 Cleaning and Care
37