Table of Contents
Advertisement
Connecting to a Projector on a Network and Projecting
Projector control
While the projector is connected to the network, the projector's A/V
Mute, Switch PC source and Switch video source functions can be
controlled from both the Remote Control and the projector's Control
panel.
Click
to display the following toolbar.
The same function as the [A/V Mute] button on the
Remote Control.
s
The Source alternates between Computer input port
and LAN each time you click.
The Source alternates between S-Video input port
and Video input port each time you click. The
S-Video input port does not switch if the cable is not
connected.
Screen Preview
A/V Mute
User's Guide "Remote Control"
Switch PC source
Switch video source
Displays the multi-screen preview screen.
Click
to display a preview with the settings you have made.
Click the displays to enlarge each Screen Preview to full-screen.
Set options
Transmission performance during the transfer of computer images
can be adjusted. s
p.39
Movie Sending Mode
Not enabled on this projector. The message "The connected projector
cannot play back movies." is displayed.
Disconnect
Disconnects the connection to the projector.
Signal intensity
This is displayed when the connection is made in Quick Connection
Mode. As the Signal intensity increases, so does the number of lit
indicators.
Switch toolbar display
18
Advertisement
Table of Contents
