To Copy Files Between A Usb Storage And The Digital Receiver - Topfield TF 7700 HD PVR User Manual

7.2.7 To copy files between a USB storage and the digital receiver
You can copy files between a USB storage and the internal hard
disk drive of the digital receiver via USB connection.
To copy files, perform the following steps:
1. Make a connection between a USB storage and the digital
receiver.
2. Press the
the file list.
• To copy a file to the internal hard disk drive, select
the Recorded programme list.
• To copy a file to the USB storage, select the USB
storage list.
3. Put the highlight bar on a desired file and press the
button.; then the list of folders gets displayed.
4. To copy a file to the USB storage, select the USB Storage
(External) folder. To copy a file to the internal hard disk
drive, select the Recorded Services (Internal) folder.
5. Press the
OK
into the specified folder.
NOTE
Your USB storage must be formatted in the FAT file system.
Otherwise, the digital receiver cannot recognize your USB stor-
age. In addition, the digital receiver can only recognize files
and directories which are named with only alphabetic, numeric
and underscore letters. If there is a file or forlder named with
other letters, the digital receiver cannot recognize not only it
but also its subsequent files and folders.
button and then the
button; then the selected file will be copied
7.2 File archive 69
or button to select
F3