Activate A Voice Command; Options; Voice Recorder; Record Speech Or Sound - Nokia 3125 User Manual

V o i c e
5. Press Start, and speak the voice
tag clearly into the microphone.
Note: Do not press
unless you want to cancel the
recording.
The phone replays and then saves
the recorded tag. The
appears next to commands which
have voice tags assigned.

Activate a voice command

After you have associated a voice
tag with a phone function, you can
issue a command by speaking the
voice tag.
1. Press and hold Contacts
to).
2. When Speak now
pronounce the voice tag clearly
into the microphone.
When the phone finds the voice tag,
Found: appears, and the phone plays
the recognized voice tag through the
earpiece. The function you requested
is activated.

Options

After you have associated a voice
tag to a command, you can choose
one of the following options:
• Select Playback
voice command tag.
• Select Change to change the
voice command.
70
Quit
icon
(or Go
appears,
to listen to the
Copyright © 2004 Nokia. All rights reserved.
• Select Delete to erase the voice
command tag.

■ Voice recorder

This feature allows you to record
pieces of speech or sound with your
phone and listen to them later. You
can also use recorded speech or
sound as ring tone. The total
available time is approximately 3
minutes if no memos have been
stored.
The recorder cannot be used when a
data call connection is active.

Record speech or sound

1. At the standby mode, select
Menu > Voice >
Record.
2. After the recorder start tone is
heard, begin recording speech or
sound.
3. When you are finished recording,
press Stop.
4. Select Recordings list
Recordings. Use the Scroll up and
Scroll down keys to move to the
desired recording. Press
> Rename. Enter the title you
wish to assign to the recording,
and press OK.
Voice recorder >
>
Options