Positioning Methods And Server - Nokia E90 Software Manual

Positioning methods and server

The integrated GPS receiver of your Nokia E90
Communicator may have difficulties providing reliable
positions in some environments. Therefore it is suggested
that before using Nokia Maps you also activate the
Assisted GPS (A-GPS) that uses assistance servers with
good satellite signal to provide positioning information.
To set the active positining methods:
1 Select > Tools > Settings
Positioning methods.
2 Select the methods you want to use by scrolling to the
method and selecting Options
Assisted GPS and Integrated GPS
3
Select Back to accept the settings.
> General > Positioning >
> Enable. Make sure have
enabled.
In addition to the positioning methods, set also the
positioning server used to access GPS data.
1
Select > Tools > Settings
Positioning server.
2
In Access point, press the scroll key and select an access
point that is available in the environment where you
plan to use Nokia Maps. Note that a wireless LAN
access point is usually not ideal for navigating.
In Server address, press the scroll key and type in the
address of your positioning server. The default server
is supl.nokia.com.
3
Select Back to accept the settings.
Copyright © 2007 Nokia. All rights reserved.
> General > Positioning >
5