Powered System With Analog Audio Connection; Powered Cynema Soundfield System With Analog Audio Connection - Niles Cynema Soundfield Installation Manual

SySTem ApplICATIoNS CoNTINued...

powered SyStem with analog audio connection

The AV system shown in Figure 18 depicts a complete Powered Cynema Soundfield System installation
utilizing the TV's analog audio output to provide a simulated 3-channel sound field. The In-Wall Power Supply
Box connects to the Amplifier Module's DC main power input. AV components like Bluray and HD Satellite/
Cable Boxes connect to the TV with HDMI. An auxiliary stereo input on the Amplifier Module is used for music
players such as iPods and Smart Phones or the connection of a whole house audio system. The Niles SWT/
SWR Wireless Subwoofer system has dedicated connections on the Amplifier Module for audio signal and DC
power.
Figure 18: Powered Cynema Soundfield System with Analog Audio Connection
Note: For MS220 Microsensor,
a 3.5mm stereo jack must be used.
Blu-ray
Player
HDMI
OUT
Cable
Box
HDMI
OUT
Whole-House
Audio System
1 2 3 4 5 6 BAND SET
Z R - 6 M u l t i Z o n e R e c e i v e r
Important Note: Always use a fixed level audio out when connecting a Whole House Audio System or a Local Audio Source (e.g.
iPod). This will simplify operation and enable the Cynama Soundfield Amplifier Module to always be your primary volume control.
NILES – 1-800-472-5555 – 1-760-268-9860
CYNEMA SOUNDFIELD
Analog
Output
MS220
MicroSensor™
OR
Fixed Audio
F M 9 3 . 1
P R E S E T 1
Zone Out
SOUNDBAR SYSTEMS
™
In-Wall Power Supply Box
+ – + – + – + –
DC24V/3.75A IN
R C L
SPEAKER OUT
OPTICAL IN SUB OUT
LINE IN
Use With
Wireless
Transeiver
DC5V/100mA OUT
IR IN
AUX IN
HDMI OUT HDMI OUT HDMI IN HDMI IN
SW-T
Wireless Transmitter
STATUS
SW-T Wireless Transmitter
iPod®
Dock
SW6.5 Compact
Powered Subwoofer
In-Wall Mounted System
CAT5
SW-R Wireless
Receiver
25