Related Manuals for ENFORCER SLI 840
Summary of Contents for ENFORCER SLI 840
- Page 2 You discovered the SECO-LARM difference. This difference is important because the ENFORCER is more than just an alarm. It is a complete security and convenience system. It is like having your personal security guard and butler on call in your car, 24 hours a day.
- Page 3 ® Tamper Indicators, Trigger Zone ID --- 8 Transmitter Functions -------------------- Arming ------------------------------------ Dual-stage Shock Sensor --------------- 8 Starter Disable --------------------------- 9 Armed ------------------------------------ Zone Bypass ----------------------------- 2nd Channel Output -------------------- 9 Power Door Locks ----------------------- 9 Sensor Bypass ---------------------------- Domelight Supervision ------------------ 9 Emergency Call for Help (Panic) ------- Appendix 1 —...
- Page 4 ® There are two different ways to arm your lights flash once to show the 30-second alarm. Tell your dealer which is best for you: arming countdown has started again. The LED will also begin to flash quickly again. If you close the last open door, and the siren Turn your ignition OFF.
- Page 5 ® When you press the Lock button to arm the because its pin switch is broken). If the alarm, and the alarm responds with three bypassed door is later closed, it will be chirps and three light flashes, there are two restored.
- Page 6 ® While your alarm is armed, your car is If the shock sensor detects light taps on the protected in the following ways: car, it will trigger the pre-intrusion alert (the siren chirps three times and the parking Potential thieves or vandals should be lights flash three times) to warn potential deterred by the flashing LED.
- Page 7 ® If you lose your transmitter, you can disarm your alarm with the ignition key and “VEPLe” switch. While your alarm is either armed or triggered, turn the ignition switch ON. Within 15 seconds, press and release the VEPLe switch 3 times. The siren and the flashing lights stop if the alarm was triggered, and then in valet (see VALET on page 8).
- Page 8 ® Sometimes you may not wish your alarm to when you use emergency disarm. See arm when you leave your vehicle. (For EMERGENCY DISARM on page 7). instance, if you leave your car with a valet attendant, you may not want to teach him how To exit valet, just turn the ignition ON and, the alarm operates.) If your alarm is set for within 15 sec., press and release the VEPLe...
- Page 9 ® With this optional feature, while your alarm is automatically engages the starter disable 10 armed, your car will not start, even if a thief minutes after you turned the ignition switch has your keys. OFF. The LED stays ON constantly to show ASD is engaged.
- Page 10 ® not closed, or broken switch, or When the Lock button is pressed, the domelight is still ON, see ZONE BYPASS alarm is armed. on page 5). When a door is closed, the alarm will When pressing the Lock button arm in 30 sec.
- Page 11 ® — Flashes quickly — during the 30-second rearm or passive Flashes one or more times after alarm arming countdown. disarmed to indicate which zone triggered. (see page 8.) — OFF when a hardwired door is opened during the — ON while 30-second rearm or passive arming transmitter button is pressed.
- Page 12 ® ® Your dealer has a wide variety of other accessories which can increase your alarm's security and convenience. Ask for more information. And insist on SECO-LARM accessories! NOTE — The accessories on this page are optional.