Servicing Your Honda; Maintenance Component Locations - Honda 2009 GL1800 GOLDWING Owner's Manual

Servicing Your Honda

The location of service-related components on your vehicle are the same as on
all other GOLDWINGS, except for the rear suspension spring pre-load
adjustment switch and the headlight beam adjustment switch, which are located
on the right fairing panel. Please refer to your owner's manual for information
on how to adjust these controls, and for all other instructions on how to keep
your motorcycle in good and safe operating condition.
Remember, there are no airbag system parts that you can safely service.
While performing routine maintenance, do not remove or tamper with any
airbag system components, including the yellow wiring and connectors. Doing
so could prevent the airbag from operating properly or cause it to deploy
unexpectedly. If an airbag system component needs to be removed in order to
reach a serviceable part, it must be done by a Honda dealer.

Maintenance Component Locations

clutch fluid reservoir front brake fluid reservoir
front brake lever
clutch lever
fuel fill cap
throttle grip
Headlight beam adjustment switch
rear suspension spring pre-load adjustment switch
17
Servicing Your Honda