2. Setting Up Your Phone
Send Text Messages
To create Send Text Messages using either a large-display
or small-display phone:
1. Enter "User Maintenance" by pressing:
11
2. Enter:
, press
HOLD
3. Press
Text Message (up to 15 characters)
4. Enter:
•
If using a large-display phone, press the soft key next to the desired row of letters.
•
If using a small-display phone press the appropriate one-touch key.
Note: Press the FLASH key to clear any existing data.
5. Use the bottom row of FF keys to select a single letter.
Notes:
•
Press the * key to erase a single entry.
•
Press the # key to enter a space.
6. Repeat steps 4-5 as many times as necessary to enter the desired Text Message
HOLD
and press
Note: Press the FLASH key to clear any existing data.
7. To set additional text messages, press the
HOLD
to move to the desired Send Text Message.
8. Repeat steps 4-7 until all Send Text Messages are entered.
AUTO PROG
9. Press
OR...
AUTO ON/OFF
Press
42
HOLD
0
, enter:
Message Number (0-9)
, enter:
to store the entry.
to return to "81-User Maintenance" (step 1 above).
to exit User Maintenance.
DBS 576 issued April 2002
ON/OFF PROG * * CONF
HOLD
, and press
, and press
VOLUME
.
HOLD
.
:
up or down key or press
576-51-750
.