Software Installation - Nvidia 3DForce4 MX440-8X Series User Manual

Table of Contents

(remaining) screw you removed to secure the adapter-

retaining bracket in place.

Replace the computer cover. Secure the cover with the

mounting screws you removed in Step 3.

You have now completed the installation of your new graphics

adapter on your system.

Upgrade Steps:

To add or change your video adapter to an existing

system, you may proceed a few steps before you install

the new hardware and software(video display driver). The

following are some of the considerations:

1. To change a new adapter, please remove the existing

video driver, or replace it with a SVGA driver from

Windows®98/Me system before you remove the

existing hardware.

2. To add a new adapter, ensure the mainboard that has

available IRQ for new devices, and there is no conflict

between the others.

3. If you try adding this video adapter to an ALL-IN-ONE

mainboard (which video port built-in already), then you

must disable that port first. Otherwise, that will be a

problem for the new video adapter setup.

4. The driver installation for system upgrade is as the

same as below, if an error occurs when you proceed

step 1,2 or 3, please consult with your system's

dealer or the existing hardware manufacturers

support.

Software Installation

Table of Contents