Table of Contents
Advertisement
Never touch the blades while the jar is attached onto the motor
unit and the appliance is plugged in.
Make sure the blade unit is securely mounted to the mill beaker
before you screw the mill onto the motor unit.
When removing the goblet from the motor unit, make sure not to
unscrew the glass jar from the blade unit, this will cause the
ingredients to leak from the goblet.
If the blades get stuck, unplug the appliance before removing the
ingredients that are blocking the blades.
Let hot ingredients cool down before chopping them or pouring
them into the jar (max. temperature 80cC/175cF, especially for
recipes with large quantities of oil or fat).
Reduce risk of injury to persons, never place mixing blades on
base without blender jar properly attached.
The blender jar is made of glass and therefore breakable. Do not
drop the glass jar on a floor or hard surface. Avoid extreme
temperatures. If the glass jar is very cold, rinse it well with
lukewarm water before pouring in hot liquid. If the glass jar cracks,
discontinue use.
Always make sure that the rubber sealing ring is in the correct
position before you use the blender in order to avoid leakage.
Tips:
You can get fresh and delicious fuit juices by means of the fruit filter
which can be purchased at your local Philips Service Centre.
Preparing the appliance for use
Wash all accessories and detachable parts (see 'Cleaning').
C
Push excess mains cord back into the cord storage compartment
on the right side of the appliance.
Using the appliance
Blender
The blender is intended for:
- Blending fluids, e.g. dairy products, sauces, fruit juices, soups, mixed
drinks, shakes.
- Mixing soft ingredients, e.g. pancake batter or mayonnaise.
- Pureeing cooked ingredients, e.g. for making baby food.
C
1
Place the rubber sealing ring on the inner edge of the blade
unit.
ENGLISH
5
Advertisement
Table of Contents
