Test
DMD Images
SINGOWS2000
White image (Level 100%)
SINGOWS2000
Black image (Level 0%)
SINGOWS2000
SMPTE image
System Reset
On the keypad, press the Menu key.
Navigate through the basic menu to the default
setting menu.
Select Reset all.
Power Down
After all tests are complete turn the power off
and disconnect all cables.
Attach the lens cap.
Verification
Verify that each image synchronizes properly through the computer
1 input.
Verify there are no problems
Verify that the image synchronizes after system reset.
Verify unit is powered off before disconnecting cables.
8-4