HP 8100 User Manual page 58

Chapter 1 HP Digital Copy
Start Button LED
LED\State On
Green The copy module is
ready to make copies.
Amber The copy module has a
critical error. Turn the
printer and copy
module off, and then
turn the printer and
copy module on.
Note When the copy module is in Power Save mode, the back light of the
display panel will be turned off and the Start LED (green) will flash at a
slow rate to indicate that the system is turned on. To bring the system out
of Power Save mode, place paper in the automatic document feeder,
press any key on the numerical keypad, or touch the touchscreen.
HP Digital Copy Control Panel
Flashing Slow
The copy module is in
Power Save mode.
The copy module has an
error and requires
attention.
Flashing Fast
The copy module is
making copies.
The copy module
has an error that
requires attention
from your service
provider.
58