Unpacking - Rutishauser 4650 Manual

Note:
Prior to delivery your TowerFeed was thoroughly tested and
care-fully packaged. Please check your unit for transportation
damage and/or missing parts immediately upon receipt.
It is advisable to get a second person to help you unpack the unit.
Warning:
TowerFeed weighs up to 60 kilograms (130 pounds) depending
on configuration. Enlist the help of a second person to lift and
place the printer. To prevent back strain or injury, bend your
knees when lifting the unit.
Unpacking the TowerFeed unit
Cut the packing strips and remove the top of the shipping container.
Remove the two blue shock absorbers and the accessories box
from the top of the unit (Fig. 3)
If TowerFeed is delivered with the optional stand for the 4-tray unit,
remove the stand that is packed in front of TowerFeed (Fig. 4).
Enlist the help of another person and carefully lift TowerFeed out of
the container (Fig. 4).
Remove the stretched plastic from TowerFeed. Be careful to not
scratch the unit when using a cutting tool.
Insert the 4 rollers (from the accessories box) with some force onto
the roller shafts of TowerFeed. They will snap into position with a
noticeable click. Insert the 2 stoppable rollers on the front side and
the 2 non-stoppable ones on the back side of the unit (Fig. 6).
Note:
When turning TowerFeed over on a side or its back, be careful
to not scratch its housing. Use a piece of cardboard or the like
to prevent the unit from scratches.
Remove the transportation inserts in the TowerFeed trays (as de-
scribed in INSTALLATION)
Important:
It is recommended to keep the packaging material and inserts
for proper protection of the unit and its parts in case of
reshipment.
IU 688 / 0402
.
5
TM
TowerFeed for the HP color LaserJet 4650

UNPACKING