Upgrade the System Firmware
1. Click Upgrade the System Firmware .
2. If new firmware is available, click Click to download and install .
CAUTION: Upgrading the firmware takes approximately 30 minutes and
must not be interrupted in any way. During this time, DO NOT perform any
browser operations or power off the device. Interruption to the firmware
upgrade process will result in complete and irrecoverable data loss and a
damaged My Book World Edition.
3. After approximately 30 minutes, the device will automatically log off and reboot.
When all LEDs on the device are illuminated, close the open browser. Your
updated My Book World Edition is now ready to use.
WD Anywhere Access Settings
1. Click WD Anywhere Access settings .
2. Click Start, Stop, or Reset. MioNet status displays after each selection.
MY BOOK WORLD EDITION
APPENDIX A - SHARED STORAGE MANAGER – 33
USER MANUAL