Port Range Forwarding; Port Triggering; Upnp; Administration - Buffalo AirStation NFINITI WHR-HP-G300N Firmware User Manual

forwarded to specific internal devices and computers. Each port
forwarding entry defines a source port and a target IP address.
Before adding or removing a port forwarding entry, save all changed
settings.
entry is added or deleted.
2.3.6.2.

Port Range Forwarding

Port range forwarding works similarly to port forwarding. Unlike port
forwarding, instead of a single port, a range of ports is forwarded to
the same range of ports at the internal target IP address.
2.3.6.3.

Port Triggering

Port triggering is a kind of port range forwarding where outgoing
traffic on specific ports enables previously defined port forwards for
the activating device. This temporarily opens required ports when
specific applications are opened on computers on the LAN.
a greater level of security than port forwarding or port range
forwarding because the ports are only opened when needed.
2.3.6.4.

UPnP

UPnP allows UPnP capable applications and devices to open and close
required ports automatically as needed. This is simple to use and does
not require further configuration steps.
2.3.6.5. DMZ
A DMZ computer is a special computer in the internal network that gets
all incoming traffic forwarded. The task of that computer is managing
this traffic. When the DMZ feature is activated the internal firewall
is activated. This can pose a security issue if not handled with care.
Furthermore, several services of the router, that have to be
accessible from the WAN side, will not work because the associated
traffic is forwarded to the DMZ computer.
2.3.6.6. QoS
QoS (Quality of Service) is a procedure to prioritise network traffic
by application. Specific services can be assigned specific bandwidth.
Aside from upstream and downstream bandwidth, you can define settings
for specific services and IP and MAC address ranges.
2.3.7.

Administration

2.3.7.1.

Management

The Management section contains settings for remotely accessing the
router and other basic settings that are usually not changed. The
settings for the language used in the Web GUI are also located here.
You may choose between Chinese (simplified & traditional), Dutch,
French, German, Hungarian, Italian, Japanese, Polish, Portuguese,
Slovenian, Spanish, and Swedish.
Any changes not saved will be lost when a port forwarding
- 15 -
The default setting is English.
This offers